Product 1/19


  • Item Code: M H53


Measurement Function          Phase detection (positive, negative),live wire check (R-S/S-T only)
Voltage Detection Method      Electrostatic induction method
Voltage Range                         70 to 600V AC (50/60Hz)(sine wave, continuous input)
Clamp Diameter                      2.4mm(0.09in) to 17mm(0.67in) of insulated wiring
Display                                       Phase Detection : Positive ; 4 LEDs lit in clockwise order and 3 short beeps
                                                                                       Negative ;4 LEDs lit in counterclockwise order and one
continuous beep
Live Wire Check                       R-S and S-T lamps will light if voltage between wires are within voltage range
Battery Check Function           ON lamp blinks to indicate battery low status when instrument is turned on
Auto Power Off                          Auto shut off if no activity is detected after power is turned ON for 15 minutes
Power supply                            Two AA size batteries × 2 (rated voltage:DC3.0V; maximum rated ower:300mVA)
Continuous Use                       approx.70 hours (standby)
Dimensions, mass                  70 mm (2.76 in)W × 75 mm (2.95 in)H × 30 mm (1.18 in)D, 200 g (7.1 oz),
Cord length                                0.7m(27.56 in)
Accessories                               Carrying case(1), strap(1), R6P manganese batteries(2), spiral tube(1)