Microphones - VHF Wireless PA Microphones - VHF Wireless Microphone – System
RECEIVER
Frequency Stability : ± 0.005%
Audio Output : 0-50mV adjustable (each channel)
Signal to Noise Ratio : >80dB
Distortion : <0.5%
Antenna Type : Telescopic
Power Requirement : 220V-240V AC 50Hz for AC adaptor (supplied along with)
Controls : Power Switch, Output Volume Control for each channel
Indication : Red LED for Power ON, Green LED for RF indication of each channel
Dimensions : W420 × H54 × D210 mm
Weight : 1.80kg
MICROPHONE
RF Output Power : 10mW (Max.)
Modulation Mode : FM
Microphone Element : Condenser, Cardioids
Maximum Deviation : ± 18kHz
Power Requirement : 2×1.5V AAA alkaline cells
Current Consumption : <60mA
Controls : ON/OFF Push Switch
Indication : Red ring LED in the gooseneck & Red round LED in the base
Dimensions : W90 × H60 × D130 mm (mic. base)
Weight : 0.55kg (without battery)
ACCESSORIES
2×Connection Cable for connecting RF receiver to an amplifier
1×AC Adaptor, 2×1.5V AAA Alkaline Cells for each microphone
OPTIONAL ACCESSORY
(Order Separately)
CC-74 (10m female XLR to 6.3mm phone plug cable for using CWM-400VG in wired mode.)