Microphones - VHF Wireless PA Microphones - VHF Wireless Microphone – System
 

RECEIVER

Frequency Stability             : ± 0.005%
Audio Output                        : 0-50mV adjustable (each channel)
Signal to Noise Ratio         : >80dB
Distortion                              : <0.5%
Antenna Type                       : Telescopic
Power Requirement             : 220V-240V AC 50Hz for AC adaptor (supplied along with)
Controls                                : Power Switch, Output Volume Control for each channel
Indication                              : Red LED for Power ON, Green LED for RF indication of each channel
Dimensions                         : W420 × H54 × D210 mm
Weight                                   : 1.80kg

MICROPHONE

RF Output Power                 : 10mW (Max.)
Modulation Mode                 : FM
Microphone Element          : Condenser, Cardioids
Maximum Deviation            : ± 18kHz
Power Requirement           : 2×1.5V AAA alkaline cells
Current Consumption        : <60mA
Controls                                : ON/OFF Push Switch
Indication                              : Red ring LED in the gooseneck & Red round LED in the base
Dimensions                          : W90 × H60 × D130 mm (mic. base)
Weight                                   : 0.55kg (without battery)

ACCESSORIES
      2×Connection Cable for connecting RF receiver to an amplifier
      1×AC Adaptor, 2×1.5V AAA Alkaline Cells for each microphone

OPTIONAL ACCESSORY
(Order Separately)
         CC-74 (10m female XLR to 6.3mm phone plug cable for using CWM-400VG in wired mode.)